Input Power Filter for Inverter ND3713T-20

Product Description

Instruction
1）High current up to 1600A
2）The EMI filter is design for VVVF and high noise environment
3）Excellent performance for both common mode and differential mode interference at low frequency
4）Approval:CE

Application

1）The inverter input filter is designed for VVVF/Servo and Frequency Converters.Reduce the EMC interference and connect on the power input side to cut off or isolate the interference channel between power network and VVVF.
2）Suppress the harmonic or surge from power network to resolve problems of Inverter like over-voltage,over-current, over-load, over-heat,false operation,no operation and so on.

1.Product Range

Type	Rated Current (A)	Rated Voltage	Rated Frequency	I Leakage (≤mA)	Test Voltage (2s)	Dim.	Circuit	Output	Climate Category
ND3310-5-S	5	250/440VAC	50/60Hz	6 250VAC/50Hz	Line/Line 1500VDC Line/Ground 2250VDC	Fig1	Fig1		25/85/21
ND3310-10-S	10					Fig2
ND3310-20-S	20					Fig3
ND3310-20-T	20					Fig6
ND3310-36-S	36					Fig3
ND3310-50-S	50					Fig3
ND3310-100-S	100					Fig4
ND3310-150-S	150
ND3310-200-S	200						Fig2
ND3310-300-C	300					Fig5
ND3310-400-C	400
ND3310-600-C	600
ND3310-1000-C	1000
ND3310-1600-C	1600

2.Circuit Diagrams

3.Outline Drawing（mm）

	A	B	C	D	E	F	G	H	I	J	S	T	U	V	W	X	Y	Z
100A	300	210	120	160	120	185	φ12	2	33	M8	/	/	50	/	/	/	/	/
150A	300	210	120	160	120	185	φ12	2	33	M10	/	/	50	/	/	/	/	/
200A	300	210	120	160	120	185	φ12	2	33	M10	/	/	50	/	/	/	/	/
300A	300	260	115	210	120	235	φ12	2	43	M12	/	/	60	25	4	15	40	Φ11
400A	300	260	115	210	120	235	φ12	2	43	M12	/	/	60	25	6	15	40	Φ11
600A	300	260	135	210	120	235	φ12	2	43	M12	/	/	60	25	8	15	40	Φ11
1000A	350	280	170	230	145	255	φ12	3	53	M12	/	/	60	40	8	20	50	Φ14
1600A	400	300	160	250	170	275	φ12	3	93	M12	26	26	60	60	10	17	93	Φ14

4. Insertion Loss

Insertion loss measured in 50Ω/50Ω system, as IEC/CISPR No. 17

A=Differential mode B=Common Mode

Input Power Filter for Inverter ND3713T-20

Product Description

Related Products