71 Series Single-phase Filter GPF271C-32
Product Description
This single phase EMI filter is designed for various anechoic chamber ,shielding room and military EMC test laboratory and can meet the test requirements of CE102,RE102 in US military standard MIL-STD-461E/F and national military standard GJB151B.The series of filter also includes three-phase four wires power line filter,400Hz/800Hz power line filter,DC power filter,signal filter, militry filter and so on.
1.Technical Data
Rated Voltage | 250V | Line/Line Line/Ground |
Rated Frequency | 50/60Hz | |
Rated Current | 32A | Ambient temperature of +40℃ |
Number of lines | 2 | |
Insertion Loss, Per MIL-STD-220C | >100dB | 14kHz-40GHz |
DC Resistance | <20mΩ | Each Line |
Power Dissipation | <40W | At Rated Current |
Test Voltage | 1200Vdc,2s | Line/Line Line/Ground |
Voltage Drop/line | <1% | 250/440V@50/60Hz |
I Leakage | 2.7A | |
Discharge Time to Below 34V | 30s | |
Climatic Category(EN 60068-1) | 25/085/21 | -25℃~+85℃ 21 days damp heat test |
Discharging Resistance Integrated
The discharge resistance is integrated into the filter in order to discharge the capacitance after turning off the power.
2. Product Range
Type | Rated Current (A) | Rated Voltage (VAC) | Number of lines | I Leakage (A) | DC resistance of each line (mΩ) | Power Dissipation (W) | Terminal | |
Input | Output | |||||||
GPF271C-16 | 16 | 250 | 2 | 1.2 | <50 | <30 | M6 | M6 |
GPF271C-32 | 32 | 2.7 | <20 | <40 | M6 | M6 | ||
GPF271C-63 | 63 | 4.9 | <6.0 | <70 | M6 | M6 | ||
GPF271C-100 | 100 | 6.5 | <3.5 | <100 | M8 | M8 | ||
GPF271C-150 | 150 | 6.5 | <2.0 | <150 | M12 | M12 | ||
GPF232C-16 | 16 | 1.2 | <50 | <30 | M6 | 4mm2 BVR | ||
GPF232C-32 | 32 | 2.7 | <20 | <40 | M6 | 6mm2 BVR | ||
GPF232C-63 | 63 | 4.9 | <6.0 | <70 | M6 | 10mm2 BVR | ||
GPF232C-100 | 100 | 6.5 | <3.5 | <100 | M8 | 35mm2 BVR | ||
GPF232C-150 | 150 | 6.5 | <2.0 | <150 | M12 | 50mm2 BVR | ||
GPF232C-200 | 200 | 6.5 | <2.0 | <150 | M12 | 70mm2 BVR |
3.Dimensions(mm)
Type | A | B | C | D | E | F | G | H | Dim. |
GPF271C-16 | 800 | 200 | 125 | 184 | 200 | 200 | 60 | M33 | Fig1 |
GPF271C-32 | 800 | 200 | 125 | 184 | 200 | 200 | 60 | M33 | |
GPF271C-63 | 800 | 200 | 125 | 184 | 200 | 200 | 60 | M33 | |
GPF271C-100 | 860 | 300 | 180 | 284 | 230 | 200 | 80 | M45 | |
GPF271C-150 | 860 | 350 | 210 | 334 | 230 | 200 | 80 | M45 | |
GPF232C-16 | 550 | 160 | 100 | 580 | 565 | 100 | 35 | M24 | Fig2 |
GPF232C-32 | 550 | 160 | 100 | 580 | 565 | 100 | 35 | M24 | |
GPF232C-63 | 800 | 160 | 140 | 830 | 815 | 100 | 50 | M45 | |
GPF232C-100 | 860 | 250 | 180 | 900 | 885 | 100 | 60 | M45 | Fig3 |
GPF232C-150 | 860 | 300 | 210 | 900 | 885 | 120 | 60 | M45 | |
GPF232C-200 | 860 | 300 | 210 | 900 | 885 | 120 | 60 | M45 |
4. Circuit Diagrams
5. Insertion Loss:
Frequency of 14kHz-40GHz, Insertion loss over 100dB | |
6. Outline Drawing:
Fig1 | Fig2 | |
Fig3 |