Filter For Vision Signal GSF103-1
Product Description
This vision signal filter is used for the vision signal control system.The series of signal filter is also used in the signal transmission and alarm control system,for example,access control in the shielded room,telephone communication,data communication,air-conditioner control,fire alarm,environmental monitoring,intercom doorbell and so on.
| Type | Rated Voltage | Rated Current（A） | Lines | Bandpass | Dim. | Typical Applications |
| GSF103-1 | 100VDC | 1 | 1 | 6MHz | 2 | Vision signal control |
| GSF-T2 | 100VDC | 0.3 | 2 | 20KHz | 1 | Telephone，fax，confidential fax |
| GSF203-1 | 100VDC | 1 | 2 | 200KHz | 1 | Special telephone, fire alarm, monitoring and environmental monitoring |
| GSF202-3 | 250VAC/0-400VDC | 3 | 2 | 100KHz | 3 | AC/DC switch signal,air-conditioner control, voice broadcasting, environmental monitoring |
| GSF312-3 | 250VAC/0-400VDC | 3 | 3 | 200KHz | 3 | Frequency conversion conditioner signal |
| GSF205-1 | 100VDC | 1 | 2 | 100KHz | 4 | Access control signal |
| GSF405-1 | 100VDC | 1 | 4 | 100KHz | 5 | Access control signal |
| GSF423-1 | 100VDC | 1 | 4 | 200KHz | 5 | 4-wires humiture signal |
| GSF-V8 | 100VDC | 1 | 8 | 10MHz | 6 | Network signal |
| GSF-N*C | 100VDC | 1 | N | 200KHz | Depend on the line | Multi-wires signal |
Note: The above signal filters can meet the shielding requirements of national & military standard C, D shielded room and different kinds of absorbing chamber. Please specify the number of control line and current if control line is more than 2 or current is greater than 3A when ordering.
| Fig1 | Fig2 |
| Fig3 | Fig4 |
| Fig5 | Fig6 |